View 15-21-T1D-CP1Q2TY-2T_125364.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet 1206 Package Chip LED (1.0mm Height)
15-21/T1D-CP1Q2TY/2T
Features
Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipmen Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. The product itself will remain within RoHS complaint version.
Descriptions
The 15-21 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc.
Applications
Backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use.
Device Selection Guide
PART No. 15-21/T1D-CP1Q2TY/2T Chip Material InGaN Emitted Color Pure White Resin Color Yellow Diffused
Everlight Electronics Co., Ltd. Device No:SZDSE-151-T06
http://www.everlight.com Prepared date: 28-Dec-2006
Rev 1
Page: 1 of 12
Prepared by: Linlin wu
Revision
:1
Release Date:2008-09-20 00:16:10.0 Expired Period: Forever
LifecyclePhase:
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/T1D-CP1Q2TY/2T
Package Outline Dimensions
1.4
Note: The tolerances unless mentioned is 0.1mm ,Unit = mm
Revision
Everlight Electronics Co., Ltd. Device No:SZDSE-151-T06
:1
http://www.everlight.com Prepared date: 28-Dec-2006
Release Date:2008-09-20 00:16:10.0
Prepared by: Linlin wu
Rev 1
Page: 2 of 12
LifecyclePhase:
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/T1D-CP1Q2TY/2T
Absolute Maximum Ratings (Ta=25
Parameter Reverse Voltage Forward Current Peak Forward Current IFP (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature Pd ESD Topr Tstg Tsol 110 150 -40 ~ +85 -40 ~ +90 Reflow Soldering : 260 Hand Soldering : 350 for 10 sec. for 3 sec. mW V 100 mA
)
Rating 5 25 Unit V mA
Symbol VR IF
Electro-Optical Characteristics (Ta=25
Parameter
Luminous Intensity Viewing Angle Forward Voltage
)
Typ. ----140 --------Max. 112 ----3.00 50 Unit mcd deg V A VR=5V IF=5mA Condition
Symbol IV 2 1/2 VF IR
Min. 45.0 ----2.60 -----
Reverse Current
Notes:
1.Tolerance of Luminous Intensity 11% 2.Tolerance of Forward Voltage 0.05V
Revision
Everlight Electronics Co., Ltd. Device No:SZDSE-151-T06
:1
http://www.everlight.com Prepared date: 28-Dec-2006
Release Date:2008-09-20 00:16:10.0
Prepared by: Linlin wu
Rev 1
Page: 3 of 12
LifecyclePhase:
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/T1D-CP1Q2TY/2T
Bin Range Of Luminous Intensity
Bin P1 P2 Q1 Q2 Min 45.0 57.0 72.0 90.0 Max 57.0 72.0 90.0 112 mcd IF =5mA Unit Condition
Bin Range Of Forward Voltage
Group Bin Code 28 T 29 30 31 Min. 2.60 2.70 2.80 2.90 Max. 2.70 2.80 2.90 3.00 V IF =5mA Unit Condition
Notes:
1.Tolerance of Luminous Intensity 11% 2.Tolerance of Forward Voltage 0.05V
Revision
Everlight Electronics Co., Ltd. Device No:SZDSE-151-T06
:1
http://www.everlight.com Prepared date: 28-Dec-2006
Release Date:2008-09-20 00:16:10.0
Prepared by: Linlin wu
Rev 1
Page: 4 of 12
LifecyclePhase:
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/T1D-CP1Q2TY/2T
Chromaticity Coordinates Specifications for Bin Grading Groups Bin Code CIE_x 0.274 0.274 0.294 0.294 0.274 0.274 0.294 0.294 0.294 0.294 0.314 0.314 0.294 0.294 0.314 0.314 CIE_y 0.226 0.258 0.286 0.254 0.258 0.291 0.319 0.286 0.254 0.286 0.315 0.282 0.286 0.319 0.347 0.315
Condition
1
2 C 3
IF= 5mA
4
Notes:
1.The C.I.E. 1931 chromaticity diagram ( Tolerance 0.01). 2.The products are sensitive to static electricity and care must be fully taken when handling products.
Revision
Everlight Electronics Co., Ltd. Device No:SZDSE-151-T06
:1
http://www.everlight.com Prepared date: 28-Dec-2006
Release Date:2008-09-20 00:16:10.0
Prepared by: Linlin wu
Rev 1
Page: 5 of 12
LifecyclePhase:
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/T1D-CP1Q2TY/2T CIE Chromaticity Diagram
Revision
Everlight Electronics Co., Ltd. Device No:SZDSE-151-T06
:1
http://www.everlight.com Prepared date: 28-Dec-2006
Release Date:2008-09-20 00:16:10.0
Prepared by: Linlin wu
Rev 1
Page: 6 of 12
LifecyclePhase:
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/T1D-CP1Q2TY/2T
Typical Electro-Optical Characteristics Curves
Revision
Everlight Electronics Co., Ltd. Device No:SZDSE-151-T06
:1
http://www.everlight.com Prepared date: 28-Dec-2006
Release Date:2008-09-20 00:16:10.0
Prepared by: Linlin wu
Rev 1
Page: 7 of 12
LifecyclePhase:
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/T1D-CP1Q2TY/2T
Label explanation
CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank
RoHS
Reel Dimensions
Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Revision
Everlight Electronics Co., Ltd. Device No:SZDSE-151-T06
:1
http://www.everlight.com Prepared date: 28-Dec-2006
Release Date:2008-09-20 00:16:10.0
Prepared by: Linlin wu
Rev 1
Page: 8 of 12
LifecyclePhase:
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/T1D-CP1Q2TY/2T
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
Note: The tolerances unless mentioned is 0.1mm ,Unit = mm
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Desiccant
Label
Revision
Everlight Electronics Co., Ltd. Device No:SZDSE-151-T06
:1
http://www.everlight.com Prepared date: 28-Dec-2006
Release Date:2008-09-20 00:16:10.0
Prepared by: Linlin wu
Rev 1
Page: 9 of 12
LifecyclePhase:
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/T1D-CP1Q2TY/2T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below. Confidence level 90% LTPD 10%
No. 1
Items Reflow Soldering
Test Condition 5 Temp. : 260 Min. 5sec. 15min H : +100 5 min 15min L : -40 5min H : +100 10 sec 5min L : -10 Temp. : 100 Temp. : -40 IF = 20 mA 85 / 85%RH
Test Sample Hours/Cycles Size 6 Min. 300 Cycles 22 PCS.
Ac/Re 0/1
2
Temperature Cycle
22 PCS.
0/1
3
Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity
300 Cycles
22 PCS.
0/1
4 5 6 7
1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs.
22 PCS. 22 PCS. 22 PCS. 22 PCS.
0/1 0/1 0/1 0/1
Revision
Everlight Electronics Co., Ltd. Device No:SZDSE-151-T06
:1
http://www.everlight.com Prepared date: 28-Dec-2006
Release Date:2008-09-20 00:16:10.0
Prepared by: Linlin wu
Rev 1
Page: 10 of 12
LifecyclePhase:
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/T1D-CP1Q2TY/2T
Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. or less and 60% RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30
If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60 5 3. Soldering Condition 3.1 Pb-free solder temperature profile for 24 hours.
3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350
for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.
Everlight Electronics Co., Ltd. Device No:SZDSE-151-T06 http://www.everlight.com Prepared date: 28-Dec-2006 Rev 1 Page: 11 of 12
Revision
:1
Release Date:2008-09-20 00:16:10.0
Prepared by: Linlin wu
LifecyclePhase:
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/T1D-CP1Q2TY/2T
5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com
Revision
Everlight Electronics Co., Ltd. Device No:SZDSE-151-T06
:1
http://www.everlight.com Prepared date: 28-Dec-2006
Release Date:2008-09-20 00:16:10.0
Prepared by: Linlin wu
Rev 1
Page: 12 of 12
LifecyclePhase:
Expired Period: Forever

▲Up To Search▲

Price & Availability of 15-21-T1D-CP1Q2TY-2T

	To Download 15-21-T1D-CP1Q2TY-2T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .